Will This Flywheel Work?!?!?!?!?
Thread Starter
|
Senior User
Joined: May 2003
Posts: 156
Likes: 0
From: McCaysville,Ga
Will This Flywheel Work?!?!?!?!?
I JUST PURCHASED OFF OF EBAY A 1973 302 WITH
Ford 302 Long Block containing:
Stock 302 block bored .060
Stock crank turned 10/10 with Federal Mogul main and rod bearings
Stock reconditioned rods
Speed pro H273CP Hypereutectic coated skirt pistons with Hastings 2M139 moly rings
New R.V. cam 288/300 adv. duration .472/.496 lift (see cam card picture)
New lifters, pushrods, rocker arms and springs
Rebuilt D2OE-BA 58cc heads that yeild approx. 9:1
Also includes remainder of gaskets, oil pump and stock valve covers
I HAVE A FLYWHEEL AND BALANCER FROM A 79 302. WILL THESE WORK OR ARE THEY BALANCED DIFFERENTLY?
ALSO, WOULD SOMEONE MIND RUNNING THIS ON THEIR DESKTOP DYNO FOR ME, I WILL ALSO HAVE MAC EQUAL LENGTH SHORTY HEADERS, EDELBROCK PERFORMER INTAKE, AND EDELBROCK 650CFM CARB, TRUE DUAL EXHAUST WITH 2-1/4 INCH PIPE FLOWMASTER 2 CHAMBERS
Ford 302 Long Block containing:
Stock 302 block bored .060
Stock crank turned 10/10 with Federal Mogul main and rod bearings
Stock reconditioned rods
Speed pro H273CP Hypereutectic coated skirt pistons with Hastings 2M139 moly rings
New R.V. cam 288/300 adv. duration .472/.496 lift (see cam card picture)
New lifters, pushrods, rocker arms and springs
Rebuilt D2OE-BA 58cc heads that yeild approx. 9:1
Also includes remainder of gaskets, oil pump and stock valve covers
I HAVE A FLYWHEEL AND BALANCER FROM A 79 302. WILL THESE WORK OR ARE THEY BALANCED DIFFERENTLY?
ALSO, WOULD SOMEONE MIND RUNNING THIS ON THEIR DESKTOP DYNO FOR ME, I WILL ALSO HAVE MAC EQUAL LENGTH SHORTY HEADERS, EDELBROCK PERFORMER INTAKE, AND EDELBROCK 650CFM CARB, TRUE DUAL EXHAUST WITH 2-1/4 INCH PIPE FLOWMASTER 2 CHAMBERS
