Distributor Swap Question
Thread Starter
|
Freshman User
Joined: Jan 2002
Posts: 31
Likes: 0
From: San Luis Obispo
Distributor Swap Question
Hello Everyone,
Today I received a new Mallory Unilite Distributor. I have already set it in the truck, but I'm having trouble with the wiring. The new distributor has these wires:
Red: + Coil
Green: - Coil
Brown: Ground
The original distributor harness has a yellow/brown, blue/brown and green/black wires.
I was hoping someone could help me figure out which wires to connect. I appreciate the help.
-Matt
'77 F-250 351M
Today I received a new Mallory Unilite Distributor. I have already set it in the truck, but I'm having trouble with the wiring. The new distributor has these wires:
Red: + Coil
Green: - Coil
Brown: Ground
The original distributor harness has a yellow/brown, blue/brown and green/black wires.
I was hoping someone could help me figure out which wires to connect. I appreciate the help.
-Matt
'77 F-250 351M
Moderator
Joined: Jan 2001
Posts: 56,997
Likes: 2,746
From: Virginia
Go here,
http://www.mrgasket.com/mallorymain.html
and click on "instructions" in the upper right corner and select mallory.
http://www.mrgasket.com/mallorymain.html
and click on "instructions" in the upper right corner and select mallory.
