When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Wanted - wheels from an early model F-2 (pre 67) Must be 16" X 6-1/2", EIGHT LUG with the hubcap nubs on the inner part of the wheel as shown in the photo. This is to accomodate the early style small diameter hubcaps. Nubs on the outside where to accomodate the larger style caps. Hubcap nubs are circled in yellow
I have a set of 16" 8 lug wheels but they are 2 part wheels. NOT widow makers. Off of a 55 F250. The last time shipped wheels they were around $100 piece to ship I think.
How many do you have? I need two but I know another guy who also needs two. How much $ do you need each? I'm in Vancouver Washington just north of Portland, Oregon. The other guy is from Arkansas I believe.
@fabbrofour If you're asking me, I was mainly saying the F2 wheels are actually only 6" wide. I wanted some taller tires (min rim width 7") and the tire place said they wouldn't mount them because my rims were only 6" wide. Sorry, I should have made myself more clear. I also had a hard time scrounging a set up.
I do have another set of the same size Ford 8 lug wheels but they are "outies" from a 1980's E series van. I thought maybe Baby Moon hubcaps or some OEM Ford would look ok at the time. Then I finally found a set of the "innies". Had to buy the whole truck.
Today I was doing some searching for some 17" OEM looking steel wheels, 7 or 8 inches wide. I'd sell my F2 innies and the hubcaps if I found something affordable that I liked. Shipping can kill sales on heavy parts like this unfortunately. I have 4 that I had powdered coated satin black and I found a 5th for my spare. Not powdered coated yet.
@fabbrofour If you're asking me, I was mainly saying the F2 wheels are actually only 6" wide. I wanted some taller tires (min rim width 7") and the tire place said they wouldn't mount them because my rims were only 6" wide. Sorry, I should have made myself more clear. I also had a hard time scrounging a set up.
I do have another set of the same size Ford 8 lug wheels but they are "outies" from a 1980's E series van. I thought maybe Baby Moon hubcaps or some OEM Ford would look ok at the time. Then I finally found a set of the "innies". Had to buy the whole truck.
Today I was doing some searching for some 17" OEM looking steel wheels, 7 or 8 inches wide. I'd sell my F2 innies and the hubcaps if I found something affordable that I liked. Shipping can kill sales on heavy parts like this unfortunately. I have 4 that I had powdered coated satin black and I found a 5th for my spare. Not powdered coated yet.
Scott in AZ.
I sold a set of 4 right at the beginning of this year for $1200. Hard to find and not reproduced.
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Slideshow: The VelociRaptor Expedition gains a lift, upgraded suspension, Brembo brakes, and trail-ready equipment while retaining the stock 440-horsepower EcoBoost V6.
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.
