When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Sorry if this is in the wrong place or if I've missed this in other forums but I'm a new poster but have been using the forums for quite a while to help me through quite a bit issues. I was wondering if anyone could tell me what these 2 brackets/mounts are for on the frame of a 2000 F-350 7.3 4x4
I think in 2000 they started putting a smallish crossbar there to address concerns that the truck may ride over a smaller vehicle in a rear end collision. I seem to remember having to remove it to install snow plow push plates back then. That might be what you're seeing in the drawing.
I think in 2000 they started putting a smallish crossbar there to address concerns that the truck may ride over a smaller vehicle in a rear end collision. I seem to remember having to remove it to install snow plow push plates back then. That might be what you're seeing in the drawing.
