Brian
Thread Starter
|
1st Gear
Joined: May 2025
Posts: 1
Likes: 0
Brian
I have a 1977 Ford F150 That has 16 inch 5 hole rims. I need to find 2 more. When I asked around I was told Ford never made a 16 inch 5 hole rim. Is this correct? They don't look like aftermarket rims. Thanks Brian
Hotshot
Joined: Feb 2004
Posts: 10,808
Likes: 2,604
From: The Shenandoah Valley
Not sure, but I've never seen a 16" 5 lug wheel on them. Might be some kind of old Jeep wheel?
Actually, not sure when they started the 5 lug pattern, might be really old Ford wheels though.
Actually, not sure when they started the 5 lug pattern, might be really old Ford wheels though.
Cargo Master
Joined: May 2009
Posts: 2,587
Likes: 47
From: Eagle River, AK
Once we see them, we can likely identify what they came off of.
Lead Driver
Joined: Jul 2017
Posts: 9,600
Likes: 1,174
From: San Jose, CA
And if you can take one off without too much hassle, look for (and take pics of!) any stampings in the backside for others to see.
Even the Early Broncos had a 16" wheel option. At least on some years.
Paul
Even the Early Broncos had a 16" wheel option. At least on some years.
Paul
Cross-Country
Joined: Jun 2016
Posts: 81
Likes: 31
in 1974 my dad ordered a new F150 with the 360 engine , heavy duty suspension , 16 inch rims and tires 5 on 5-1/2 bolt circle , 3 speed on the column,,,, 360 gave up the ghost wrist pin came loose and tore a hole in the block, replaced it with a 6 cylinder engine out of his 1971 F100 which my brother had wrecked . about 6 months after we had replaced the engine Ford sent out a recall for the 360 engines due to wrist pin locks not being installed properly. i still have the 5 16 inch rims which i plan on having widened to 16 x7 to use on one of my 1977 F150 4x4's.
Thread
Thread Starter
Forum
Replies
Last Post
Billybeag
1987 - 1996 F150 & Larger F-Series Trucks
1
Oct 17, 2022 09:11 PM
