1995 4.0 rebuild
Thread Starter
|
4wd Low
Joined: Mar 2024
Posts: 10
Likes: 6
1995 4.0 rebuild
I rebuilt my 95 4.0 pushrod 2 wheel drive Ranger and having a problem and hoping someone could help me out! thank you in advance for all that reply. problem is it takes about 3 hard starts and then has a intermit low/high idle and runs rich, when I accelerate it stumble and has no power when driving and wont go over 25mph. my question is do i need to let the ECU learn the new rebuild? the timing chain is correct and so is the camshaft position sensor. the compression is also with in 10 % of all cylinders.
Thread
Thread Starter
Forum
Replies
Last Post
Kruse
2.6, 2.8, 2.9, 4.0 & SOHC 4.0 V6
1
Dec 5, 2015 06:07 PM
Pkupman82
Fuel Injection, Carburetion & Fuel System
1
Sep 20, 2003 11:27 PM
