Fender Dent
Thread Starter
|
Elder User
Joined: Aug 2003
Posts: 828
Likes: 0
From: Bellingham, WA
Fender Dent
Hey All i have an 85 150..... on the passenger side of the bed, about 6 inches to the rear of the tire, i have a dent, the type that probly only i would notice, but none the less, it must be fixed.... i dont want to have to go to extensive body work and it cant just be pushed out from behind, any help?
Elder User
Joined: Mar 2003
Posts: 999
Likes: 1
From: Willamette Valley Oregon
<cr>
Well, if it is 1/8" or less in depth, just fill it with polyester filler.
Assuming the paint is good (well attached to the metal), you can scuff the paint with some sandpaper and just apply the filler over the paint.
Well, if it is 1/8" or less in depth, just fill it with polyester filler.
Assuming the paint is good (well attached to the metal), you can scuff the paint with some sandpaper and just apply the filler over the paint.
