Hub Cap Fit
Thread Starter
|
Tuned
Joined: Jul 2007
Posts: 289
Likes: 0
From: So. Cal.
Hub Cap Fit
I just got a replacement used hub cap for my 2017 F350 DRW rear wheel and it seems to have the right Ford number on it and the lug nuts look like the ones in the picture listed for the truck (https://www.fordpartsgiant.com/parts...)&location=pd:,)
BUT it seems the clips in the hubcap won't reach the lugnuts.
Thanks for any help.
BUT it seems the clips in the hubcap won't reach the lugnuts.
Thanks for any help.
Thread Starter
|
Tuned
Joined: Jul 2007
Posts: 289
Likes: 0
From: So. Cal.
Now there's an idea. Maybe I should take the one on the other side off and inspect the depth of the clips that hold it on. Thank you!
Laughing Gas
Joined: Feb 2020
Posts: 891
Likes: 564
From: End of the Rockies
You may have been sent the single rear wheel F350 gas engine axle caps. Heavy duty single rear wheel axle and dually axle stick out more.
You have to look at the depth dimensions because the sites on line will not tell the difference in the description.
You have to look at the depth dimensions because the sites on line will not tell the difference in the description.
Thread
Thread Starter
Forum
Replies
Last Post
