Windsor 351 misses
Thread Starter
|
New User
Joined: Mar 2003
Posts: 21
Likes: 0
Windsor 351 misses
I have an '89 F250 with a Windsor 351. Has started to "miss," especially when under load (i.e., up hill). Also showing tendency to cold-stall. Will haul it into local shop later this week for a look, but am curious about any possible causes/solutions folks here can suggest. Thank you!
Senior User
Joined: Nov 2003
Posts: 320
Likes: 3
From: Northwest BC. Canada
Spark plugs, wires, distributor cap, bad valves, bad piston or rings, fuel injector fouled, etc. any one of those and more will cause it. Your shop will get it right for ya.
Good luck.
Dan
Good luck.
Dan
