turn signals
Thread Starter
|
1st Gear
Joined: Jun 2024
Posts: 1
Likes: 0
turn signals
I instilled turn signals on a model A everything works great, but I forget to turn the off, so I got a buzzer. when I put the buzzer on the P thermal it sounds off ok, but when I turn the signals off it sound a constant sound, I checked with a test light, and it did not light up. Any Ideas
Last edited by Woodie car; Jun 26, 2024 at 04:02 PM.
Fleet Mechanic
Joined: Sep 2010
Posts: 1,829
Likes: 466
From: Mason City, Iowa
It sounds like you are using a 3 terminal flasher unit. Your buzzer is connected to the correct terminal which should be P for pilot. Double check to see that your battery voltage is being fed to the X terminal, and the L (for load) terminal runs to the turn signal switch.
Thread
Thread Starter
Forum
Replies
Last Post
