Replace Fuse Block
Cargo Master
Joined: Jul 2005
Posts: 2,311
Likes: 367
From: Kansas
no experience with that specific brand, but I would be more inclined to find an OEM fuse block from a salvage yard which "should" have higher quality base material and more importantly "should" have higher quality plating on the electrical components...this opinion is solely based on general experiences with cheaper products like this.
Laughing Gas
Joined: Aug 2007
Posts: 1,107
Likes: 32
From: Spokane, WA
When i wired Buford, I went with Centech Wiring for not only my loom needs, but also the fuse blocks they offered. Their site has a number of fuse blocks available, and while it's only my opinion, I think they're going to be a bit higher quality than what you showed. I think the larger fuse block they have has both switched and un-switched, but also sockets for the horn relay, as well as the turn and hazard relays. I think they're around $130, which isn't terrible. The blocks also come with a stainless cover for cleaner installations, and ease of access to the fuses. If you Google Centech Wiring, you'll find them.
If you decide to wire the whole vehicle, they will also have a discussion with you and set up your entire wiring harness for the features your particular vehicle has. They also use Ford connectors, which is a nice feature. Their wires are good quality, and they all come pre-labeled for clarity.
Just an option for ya.
If you decide to wire the whole vehicle, they will also have a discussion with you and set up your entire wiring harness for the features your particular vehicle has. They also use Ford connectors, which is a nice feature. Their wires are good quality, and they all come pre-labeled for clarity.
Just an option for ya.
Fleet Mechanic
Joined: Aug 2005
Posts: 1,462
Likes: 74
From: Hartford, AL
I have almost the exact setup now now for 10 years with no issue. I actually created some fused circuits that didn’t exist when wired it in.
Thread
Thread Starter
Forum
Replies
Last Post
TMI
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
1
Jun 29, 2017 07:09 AM
TMI
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
10
Mar 24, 2017 04:50 PM
TMI
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
5
Feb 19, 2016 06:32 PM
