1970 F600 decode
Super Moderator
Joined: Apr 2004
Posts: 34,533
Likes: 2,835
F61 = F600 gas, 4x2
D = 330 2V HD FT gas V8
C = Ontario Truck Plant
G55571 = 1970 numerical series, September 1969 production
156 = 156 inch wheelbase
T = Red
F610 = F600 gas, 4x2, 21,000 lbs GVWR
4B8
4B = Black with black HD leather grain vinyl
8 = Standard cab
M = Clark model 285V five speed direct transmission
F3C
F3 = Eaton model 15201 two speed rear axle, 15,000 lbs capacity, 6.33 / 8.81 ratios
C = Ford 6,000 lb capacity front axle
21000 = 21,000 lbs GVWR
164 3800 = 164 certified net HP @ 3800 RPM
47 = Cincinnati District Sales Office
No special order.
As per other posts, it's the front axle capacity that you need for the king pins.
I'm giving you your own thread for the truck so if you post again, all you info will be here.
D = 330 2V HD FT gas V8
C = Ontario Truck Plant
G55571 = 1970 numerical series, September 1969 production
156 = 156 inch wheelbase
T = Red
F610 = F600 gas, 4x2, 21,000 lbs GVWR
4B8
4B = Black with black HD leather grain vinyl
8 = Standard cab
M = Clark model 285V five speed direct transmission
F3C
F3 = Eaton model 15201 two speed rear axle, 15,000 lbs capacity, 6.33 / 8.81 ratios
C = Ford 6,000 lb capacity front axle
21000 = 21,000 lbs GVWR
164 3800 = 164 certified net HP @ 3800 RPM
47 = Cincinnati District Sales Office
No special order.
As per other posts, it's the front axle capacity that you need for the king pins.
I'm giving you your own thread for the truck so if you post again, all you info will be here.
Thread
Thread Starter
Forum
Replies
Last Post
