When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I got a 7.3 replaced the turbo pedestal an took the ebpv so I deleted it but now can’t get truck to fire turns over fine no sel just no crank does anybody have an idea of what is going on?
I got a 7.3 replaced the turbo pedestal an took the ebpv so I deleted it but now can’t get truck to fire turns over fine no sel just no crank does anybody have an idea of what is going on?
Not much information but I would start with anything I might have touched.
do you have a wait to start light, is it possible you shorted a wire and a fuse blow.
Not much information but I would start with anything I might have touched.
do you have a wait to start light, is it possible you shorted a wire and a fuse blow.
yes have a wait to start light an Ive went back over everything I touched an it’s all good I replaced the batteries cos they was weak an did an oil change