Hopefully a fast answer
Thread Starter
|
4wd Low
Joined: May 2014
Posts: 11
Likes: 0
Hopefully a fast answer
I've been searching high and low, and can't come up with a definitive answer to this question.
2015 F250 Platinum 6.7L CCSB. Is there, or is there not a factory sensor that can monitor temperatures PRE turbo?
If there is, does anyone have the PID for it for Torque Pro? I have the common CSV imported already, but do not see it in the list.
I also have inputted this custom PID:
Using hex 22055e, Unit Type C, but it's reading ~1360F sitting at idle, which seems incorrect.
The DPF and entire rest of the exhaust fell off, so those standard 4 sensors are unavailable for me to monitor right now. I had to temporarily install a complete MBRP stainless system from the turbo to the tips, just until I can find that missing DPF.
Appreciate any information! 😉
2015 F250 Platinum 6.7L CCSB. Is there, or is there not a factory sensor that can monitor temperatures PRE turbo?
If there is, does anyone have the PID for it for Torque Pro? I have the common CSV imported already, but do not see it in the list.
I also have inputted this custom PID:
(0.0004*(((1164.26*(((256*A)+B)*0.00097285))/(4.98-(((256*A)+B)*0.00097285)))*((1164.26*(((256*A)+B)* 0.00097285))/(4.98-(((256*A)+B)*0.00097285)))))+(1.107*((1164.26*(((2 56*A)+B)*0.00097285))/(4.98-(((256*A)+B)*0.00097285))))-237.33
The DPF and entire rest of the exhaust fell off, so those standard 4 sensors are unavailable for me to monitor right now. I had to temporarily install a complete MBRP stainless system from the turbo to the tips, just until I can find that missing DPF.
Appreciate any information! 😉
Thread
Thread Starter
Forum
Replies
Last Post
F 250 6 liter
6.0L Power Stroke Diesel
2
May 15, 2010 10:03 PM
