5.0 upper intake manifold
Thread Starter
|
Freshman User
Joined: Nov 2003
Posts: 36
Likes: 0
From: Indiana
5.0 upper intake manifold
Can anyone tell me what type head, (torx etc.) and what size, the screw for the center bolt on the "right" (sitting in driver seat )for the upper intake manifold for a 1988 5.0 is?
I checked the haynes manual and could not find any info except it was a screw.
I have the rest of the bolts out and am in the middle of replacing the valve cover gaskets....please help! I have got to get this thing off and done!
The Engineers did it again.
(Hey guys lets put a screw in place of a bolt, and put it in the most difficult spot to reach so you can't see it! That will keep them guessing!)
I checked the haynes manual and could not find any info except it was a screw.
I have the rest of the bolts out and am in the middle of replacing the valve cover gaskets....please help! I have got to get this thing off and done!
The Engineers did it again.
(Hey guys lets put a screw in place of a bolt, and put it in the most difficult spot to reach so you can't see it! That will keep them guessing!)
