When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good morning Tom, we've been having windchill temperature as low as -47° here. Apparently the Atlantic provinces are supposed to be experiencing that today..
My 53 F100 lives on Block Island, I live in Connecticut. As such all of my tools are about 100 miles away and I never seem to bring all the right things to work on it. I'm looking for someone in Rhode Island who can go through my OEM front end and get it squared away. If they're also up for the challenge, I have a brand new wiring harness to replace the one under the dash. Do you guys know of anyone who would be interested in doing one or the other job? I will bring it over to the mainland.
My 53 F100 lives on Block Island, I live in Connecticut. As such all of my tools are about 100 miles away and I never seem to bring all the right things to work on it. I'm looking for someone in Rhode Island who can go through my OEM front end and get it squared away. If they're also up for the challenge, I have a brand new wiring harness to replace the one under the dash. Do you guys know of anyone who would be interested in doing one or the other job? I will bring it over to the mainland.
Kevin
I’d be happy to help if I didn’t have a pile of projects collection dust.
Hey hey. Sorry, been off the radar for a while. Hose projects, Family issues, insane heat, life and work. Too many things and not enough hours in the day.
they have a complete machine shop and turn out tons of custom engine builds.
Thanks for this. I was hoping to get a shop a little closer to Point Judith than Framingham, MA. It definitely doesn't need to be a performance shop either, just a competent builder who can refresh my motor.