When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was at the jy working on getting to a set of gt40 heads. The right rear lower intake manifold bolt head is stripped. No bad, but enough to keep the socket from doing the job. The jy does not allow torches. Any ideas on how to get it out? The clearances are tight and I don’t want to damage the manifold.
Not sure if you have a stud bolt in that spot, you can try to find one of these, tap it on, it may not be deep enough for a 3/8 extension.
If not, try a smaller size socket, tap it on the head. Chances are you will break the bolt.
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.
