need help id'ing carb
Thread Starter
|
New User
Joined: Nov 2003
Posts: 8
Likes: 0
From: wisconsin
need help id'ing carb
hello all before you all flame me or something i have searched the forums before posting this and i cant find anything on my carb. on the bowls ( its a 4bbl ) it says manufactured by holley for motocraft. i cant find what model of holley it is cfm rating or anything. i was also told this carb is worth money i would like to know how much. im a fanatic about knowing how much money i have in mhy vechiles. the part # is e6he-9510-ac, list-50305-2 and the number under all of those is 1156. i have checked the holley site and all 
with no luck. im looking for tuning guides and all for this carb. but it runs just needs to be tuned out. i think it is a autolite 4100 with a 790 cfm but i need to make sure before trying to adjust anything. i thank you all for your time and info on any of my questions.
with no luck. im looking for tuning guides and all for this carb. but it runs just needs to be tuned out. i think it is a autolite 4100 with a 790 cfm but i need to make sure before trying to adjust anything. i thank you all for your time and info on any of my questions.
Moderator
Joined: Dec 2001
Posts: 22,436
Likes: 17
From: Louisville,Ky.
It is a factory Holley off of a 86 Ford. Possibly a heavy duty truck. Not sure what the H stands for.
It is more than likely a 600cfm.
You can always call Holley's Tech line or e-mail them at "carburetor@holley.com" . they always have responded to me within 2 days.
Jimmy
It is more than likely a 600cfm.
You can always call Holley's Tech line or e-mail them at "carburetor@holley.com" . they always have responded to me within 2 days.
Jimmy
Thread
Thread Starter
Forum
Replies
Last Post
AbandonedBronco
Ford Inline Six, 200, 250, 4.9L / 300
93
Mar 21, 2014 11:14 PM
csramsey640
Fuel Injection, Carburetion & Fuel System
3
Feb 17, 2005 05:17 PM
