Deciphering trouble code
Junior User
Joined: Oct 2003
Posts: 63
Likes: 0
P0603 is " Internal Ctrl Mod KAM Error" I get that one after reprograming my computer, it dosen't seem to mean anything in my case. The check engine light comes on during a reprogram, I erase it after programing and the truck runs fine.
P1211 is "IPC not controlable- Pres Above/Desired" Something to do with A/F metering, just what this means is a good question.
Later Larry
P1211 is "IPC not controlable- Pres Above/Desired" Something to do with A/F metering, just what this means is a good question.
Later Larry
Freshman User
Joined: Nov 2003
Posts: 32
Likes: 0
From: Ormond Beach, FL.
I've programmed and reprogrammed my PSD with the microtuner, and tonight was the first time I ever got the P0603 code, or any other for that matter. I hope Larry is right, but I'm wondering why it has come up.
Freshman User
Joined: Nov 2003
Posts: 32
Likes: 0
From: Ormond Beach, FL.
Beaboarder,
I just went through about 30 websites, and I finally came to one that may help. I know it's been a few month's since you posted this, but figured if you didn't have the info, here it is.
P0603 -Powertrain Control Module KAM Test Error
Indicates the PCM has experienced an internal memory fault. However there are external items that can cause this DTC.
-Reprogramming
-Battery terminal corrosion
-KAPWR to PCM interrupt/open
-Loose battery connection
-Damaged PCM
If KAPWR is interrupted to the PCM because of a battery or PCM
disconnect, DTC can be generated on the first power-up.
I just went through about 30 websites, and I finally came to one that may help. I know it's been a few month's since you posted this, but figured if you didn't have the info, here it is.
P0603 -Powertrain Control Module KAM Test Error
Indicates the PCM has experienced an internal memory fault. However there are external items that can cause this DTC.
-Reprogramming
-Battery terminal corrosion
-KAPWR to PCM interrupt/open
-Loose battery connection
-Damaged PCM
If KAPWR is interrupted to the PCM because of a battery or PCM
disconnect, DTC can be generated on the first power-up.
