Notices
1978 - 1996 Big Bronco  
Sponsored by:
Sponsored by:

nertral safety switch

Thread Tools
 
Search this Thread
 
Old Nov 7, 2003 | 02:31 AM
  #1  
kraven's Avatar
kraven
Thread Starter
|
New User
Joined: Nov 2003
Posts: 6
Likes: 0
nertral safety switch

My 88 bronco doesn't start without "jumping" it. The cellinoid has no power going to it and I suspect the neutral safety switch. How difficult is it to fix and how do I to about doing it.
 
Reply
Old Nov 13, 2003 | 12:24 AM
  #2  
tom2131968's Avatar
tom2131968
Senior User
Joined: May 2003
Posts: 254
Likes: 0
It's easy...i think that they cost about 25 dollars or so from auto zone. for whatever reason I have replaced it twice since 1996. It sits on the drivers side of the transmission. I think it it attached with 3 bolts. Took about 10 minutes each time....

tom t
 
Reply
Old Nov 13, 2003 | 12:35 AM
  #3  
BroncoRoadKill's Avatar
BroncoRoadKill
Posting Guru
Joined: Sep 2002
Posts: 2,195
Likes: 1
From: San Antonio, Texas
You could get under there and see if it's ujusted right.
 
Reply




All times are GMT -5. The time now is 02:53 PM.