Carb and intake

Reply Subscribe

Thread Tools

Search this Thread

Nov 6, 2003 | 09:13 PM

79toquremonster

Thread Starter

New User

Joined: Nov 2003

Posts: 10

Likes: 0

Carb and intake

i have a 1973, 460 police interceptor and i want to put 456 gears in and was wandering, because i need a new carb and intake, what kind and size carb and intake i should use.

Nov 6, 2003 | 10:10 PM

plowpusher

Posting Guru

Joined: Sep 2003

Posts: 1,192

Likes: 1

From: lino lakes, mn

what rpm range do you run what tires, cam,exhaust simple huh?

Nov 7, 2003 | 01:17 PM

79toquremonster

Thread Starter

New User

Joined: Nov 2003

Posts: 10

Likes: 0

what do you mean about rpm range? I probably going to run 36x12x50 mudd terrain, daul exhaust blast packs, don't know which cam yet.

Nov 7, 2003 | 02:43 PM

77PDQFWD

New User

Joined: Nov 2003

Posts: 7

Likes: 0

monster you are going to want to try and match up the cam,intake and carb with what you are trying to do with your police car

Nov 8, 2003 | 09:57 PM

Torque1st

Posting Legend

Joined: Sep 2001

Posts: 30,255

Likes: 37

Moved to proper forum.

Nov 9, 2003 | 12:10 PM

georgedavila

Postmaster

Joined: Aug 2001

Posts: 2,882

Likes: 0

From: Nevada

From the tires it sounds like it's in a truck. Cam with around .495/.510 lift, 200/210 duration @.050, stealth intake, Edlebrock 750 and full tube headers, headers being the most important.

Nov 9, 2003 | 03:13 PM

79toquremonster

Thread Starter

New User

Joined: Nov 2003

Posts: 10

Likes: 0

sorry it is in a 1979 F150 pickup with a total of 7inches of lift but the motor came out of a police interceptor. thanks for the advice i'll check up on what cam i have.