custom interior
Thread Starter
|
Posting Guru
Joined: Jun 2002
Posts: 1,288
Likes: 1
From: redding U.S.A.
custom interior
http://www.cstrikesucks.homestead.com/basic.html
what do ya guys think?
The stock was a vinyl bench seat.
The sub box was made out of a $100 sheet of 3/4" premium grade birch veneer plywood. The trim pieces are made of the same stuff. I stained the wood MinWax dark mahogany red.
The glass was cut by Apex Glass (Sandy Hook, CT) and is 1/4" thick, gray tint.
Its a sealed (and i mean sealed) enclosure.
The sub is an alpine Type-S 10" DVC. Its pushed by a JBL BP.150.1 amp, with an alpine cd player.
The bucket seats i got on ebay. I believe they came from a chysler concord or similiar, but the guy didn't know what kind of car they came out of. I welded up some brackets, then welded them to the floor pan, and bolted and welded the seats the to brackets/floor.
I also have a U.S. flag as my headliner
Next in line:
white LEDs or tubes to illuminate floor pan
dynomat on the cieling, rear of cab, and floor
what do ya guys think?
The stock was a vinyl bench seat.
The sub box was made out of a $100 sheet of 3/4" premium grade birch veneer plywood. The trim pieces are made of the same stuff. I stained the wood MinWax dark mahogany red.
The glass was cut by Apex Glass (Sandy Hook, CT) and is 1/4" thick, gray tint.
Its a sealed (and i mean sealed) enclosure.
The sub is an alpine Type-S 10" DVC. Its pushed by a JBL BP.150.1 amp, with an alpine cd player.
The bucket seats i got on ebay. I believe they came from a chysler concord or similiar, but the guy didn't know what kind of car they came out of. I welded up some brackets, then welded them to the floor pan, and bolted and welded the seats the to brackets/floor.
I also have a U.S. flag as my headliner
Next in line:
white LEDs or tubes to illuminate floor pan
dynomat on the cieling, rear of cab, and floor
Senior User
Joined: Apr 2003
Posts: 208
Likes: 0
From: Cheyenne
Not to bad! THose seats fit it pretty good!
you must not have a girlfriend, or are married. Thats what I like about my truck is that the 'ol lady can sit next to me. But there are hair ties in your shifter, so Im guessing maybe your like the rest of us on here...you just like your truck!! the girls can ride in it, but dont mess with us as we drive! Good Job!
you must not have a girlfriend, or are married. Thats what I like about my truck is that the 'ol lady can sit next to me. But there are hair ties in your shifter, so Im guessing maybe your like the rest of us on here...you just like your truck!! the girls can ride in it, but dont mess with us as we drive! Good Job!
Senior User
Joined: Sep 2003
Posts: 147
Likes: 0
From: N.Y.
holy ****. i never though i would hear of another person trying this let alone actually have done it. ive been plotting for the last 3 weeks maybe lining up mustang seats n a sub box and stuff to build something i designed almost exactly the same as wut u built. this is such a relief that now i hae sumthin to look at . question. if u dun mind measuring wutr the dimensions of ur box.
Thread Starter
|
Posting Guru
Joined: Jun 2002
Posts: 1,288
Likes: 1
From: redding U.S.A.
The console is 14" wide, 16" tall and about 31" long i think. The sub box is (i believe) 14" wide 16" tall 18" long. the sealed enclosure tho is about 6" deep.
throw all the questions you want at me!
maztang- they're rubber bands!
i know where you're goin with the girlfriend thing... but i do have a bed cover and an air matress fits well between the wheel wells.....
I'm of course talking about softening the ride for some sheets of sheetrock.....
as a 17 year old, i aint hitched!
Its nice to have only two seats. I had the bench seat, and its a manual tranny, so whoever rode b**** got second and fourth gear to the crotch. (yeah yeah maztang...) It's nice that a third person is not an option any more.
i went for the old school look. i think it compliments the truck well
throw all the questions you want at me!
maztang- they're rubber bands!
i know where you're goin with the girlfriend thing... but i do have a bed cover and an air matress fits well between the wheel wells.....
I'm of course talking about softening the ride for some sheets of sheetrock.....
as a 17 year old, i aint hitched!
Its nice to have only two seats. I had the bench seat, and its a manual tranny, so whoever rode b**** got second and fourth gear to the crotch. (yeah yeah maztang...) It's nice that a third person is not an option any more.
i went for the old school look. i think it compliments the truck well
Senior User
Joined: Sep 2003
Posts: 147
Likes: 0
From: N.Y.
Oh. did u use a single sub box then build around it or did u build everything custom for the truck. cause i have a dual sub box that is sealed in the middle and i think im just gonna seperate it and start off with the single sub box and build off of it to save time.
Elder User
Joined: Apr 2001
Posts: 772
Likes: 0
From: Glen Burnie Maryland
Rhetor;
Good job there. I'd a done one thing different to enhance the look of the box. Coutersink the screw holes and then fill the holes with plugs matching the grain. Then sand, stain, and seal. Now yer clothes won't catch on the screw heads.
Larry
Good job there. I'd a done one thing different to enhance the look of the box. Coutersink the screw holes and then fill the holes with plugs matching the grain. Then sand, stain, and seal. Now yer clothes won't catch on the screw heads.
Larry
Trending Topics
Thread Starter
|
Posting Guru
Joined: Jun 2002
Posts: 1,288
Likes: 1
From: redding U.S.A.
i would have plugged the holes, but the top needs to be removable, and also i like the look of the rugged dark stained box with the screw holes. Adds to the oldschool look
I built the box/console all in one hit. I designed the hole deal as one unit then cut, glued n screwed!
I built the box/console all in one hit. I designed the hole deal as one unit then cut, glued n screwed!
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Senior User
Joined: Apr 2003
Posts: 208
Likes: 0
From: Cheyenne
Originally posted by rhetor
maztang- they're rubber bands!
i know where you're goin with the girlfriend thing... but i do have a bed cover and an air matress fits well between the wheel wells.....
as a 17 year old, i aint hitched!
maztang- they're rubber bands!
i know where you're goin with the girlfriend thing... but i do have a bed cover and an air matress fits well between the wheel wells.....
as a 17 year old, i aint hitched!
As a married man..even a bench seat is pushing my luck!! :-)
Senior User
Joined: Sep 2002
Posts: 167
Likes: 0
From: Alberta
Wow, functional cupholders in a ford truck...
Looks good, it adds a nice personal touch to your ride. I've been eyeing bucket seats for my truck for a while now, and yours look pretty sweet. Excellent job!
Looks good, it adds a nice personal touch to your ride. I've been eyeing bucket seats for my truck for a while now, and yours look pretty sweet. Excellent job!
Thread
Thread Starter
Forum
Replies
Last Post
displacement4me
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
4
Jan 25, 2009 03:25 AM
ranger33
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
6
Sep 20, 2004 12:34 AM
Veeha
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
6
Jul 9, 2004 07:42 PM
bengleu22
Audio & Video Systems, Navigation, Satellite Radio & Mobile Electronics
8
Sep 4, 2003 02:15 PM
