abs on navigator
Thread Starter
|
Freshman User
Joined: Sep 2000
Posts: 44
Likes: 0
From: tullahoma tn
abs on navigator
i have a 99 navigator the abs light came on ...took it to dealer and he said the fuild was a little low, so he toped it off and the light was out....but came back on ....but it dont stay on ..it kinda comes and goes..any ideas on what to check ???? thanks for the help bruce
Postmaster
Joined: May 2002
Posts: 3,028
Likes: 1
From: Annapolis, Maryland
Agree with luckild - it's impossible to diagnose without reading the code.
These dealers drive me nuts - it takes 30 seconds to scan a code, yet they won't do it unless they can charge you $100 for it.
XXL
These dealers drive me nuts - it takes 30 seconds to scan a code, yet they won't do it unless they can charge you $100 for it.
XXL
Senior User
Joined: Jun 2003
Posts: 400
Likes: 0
Make sure you check wires to the sensor, mine had broken wires because it was rubbing on the brake flex hose. Had to replace it also because it was worn to the second layer. Repaired the breaks and it works, good luck.
