3/4 ton suspension...

Reply Subscribe

Thread Tools

Search this Thread

Nov 3, 2003 | 09:36 AM

Doorgunner808

Thread Starter

Tuned

Joined: Nov 2001

Posts: 281

Likes: 1

From: Back in Central Texas

3/4 ton suspension...

I know I have seen a post about this before but I can't seem to find it. Will the rotors, hubs, etc. from a '80's era F250 or F350 4x4 IFS fit on a similar era Bronco? I want to put a D60 in the front but don't think I am gonna be able to afford it when I get home. I already have a sterling 10.25" in the rear of the Bronco and need an 8-lug setup in the front to hold me over for a while till I can get a D60. Any help or suggestions would be greatly appreciated.

DG808

Nov 3, 2003 | 02:25 PM

greystreak92

Lead Driver

Joined: Sep 2002

Posts: 9,182

Likes: 12

From: Gateway to the West

Spring mounts may need to be moved if I recall correctly.

Nov 5, 2003 | 09:11 AM

Doorgunner808

Thread Starter

Tuned

Joined: Nov 2001

Posts: 281

Likes: 1

From: Back in Central Texas

Thanks Greystreak, but I meant just the rotors and hubs, or even just the rotors and calipers, not necessarily the whole ttb system. I want to keep the coils for now, I know that the 3/4 ttb used leaves instead. I guess I should have been a little clearer. I have most of the parts I need to put in a D60 underneath, springs, hangers, etc. Everything but the D60 itself, I can't afford it right now. I just need to know if the ends of the 3/4 ttb will bolt up to the 1/2 ttb system.

Thanks again,

Bobby Land

Nov 8, 2003 | 06:14 PM

steve83

Post Fiend

Joined: Nov 2002

Posts: 9,987

Likes: 7

From: Memphis, TN

If you have hubs from a D44IFS-HD, you might be able to swap parts onto a normal D44IFS, but not if they came from a D50IFS. What year is the donor 3/4-ton truck?

Nov 8, 2003 | 09:05 PM

Doorgunner808

Thread Starter

Tuned

Joined: Nov 2001

Posts: 281

Likes: 1

From: Back in Central Texas

I don't have one yet. I was under the ussumtion that the only IFS under the F250s from 80 to 96 were D44's. Am I wrong? If so what year did the D50IFS come with the F250?

Thanks.

DG808