LED 3rd brake lights
Thread Starter
|
Laughing Gas
Joined: Dec 2017
Posts: 879
Likes: 40
From: Greensburg, IN
LED 3rd brake lights
So we all know the "fits F250, F350 and Excursion" lights on amazon/ebay are liars that don't actually fit the excursion because of the flared end tips.
But the lenses pop off really easy and then you can bake the excursion lens apart (I did 220°F for 10 minutes) and reseal it onto the amazon LED assembly with some butyl rubber and another round through the oven.
I'll post pictures later, but I thought it would be good for people to know.
But the lenses pop off really easy and then you can bake the excursion lens apart (I did 220°F for 10 minutes) and reseal it onto the amazon LED assembly with some butyl rubber and another round through the oven.
I'll post pictures later, but I thought it would be good for people to know.
Thread Starter
|
Laughing Gas
Joined: Dec 2017
Posts: 879
Likes: 40
From: Greensburg, IN
Absolutely nothing stopping you from putting LED bulbs into the oe housing. Just make sure you check the polarity before buttoning it all back up 😆
Postmaster
Joined: Sep 2016
Posts: 3,941
Likes: 240
From: Texas
So we all know the "fits F250, F350 and Excursion" lights on amazon/ebay are liars that don't actually fit the excursion because of the flared end tips.
But the lenses pop off really easy and then you can bake the excursion lens apart (I did 220°F for 10 minutes) and reseal it onto the amazon LED assembly with some butyl rubber and another round through the oven.
I'll post pictures later, but I thought it would be good for people to know.
But the lenses pop off really easy and then you can bake the excursion lens apart (I did 220°F for 10 minutes) and reseal it onto the amazon LED assembly with some butyl rubber and another round through the oven.
I'll post pictures later, but I thought it would be good for people to know.
Thread Starter
|
Laughing Gas
Joined: Dec 2017
Posts: 879
Likes: 40
From: Greensburg, IN
http://imgur.com/a/DEGJQM2
Got the comparison pictures taken...
Still havent sorted out the wire grommet on the cable.
Got the comparison pictures taken...
Still havent sorted out the wire grommet on the cable.
Thread
Thread Starter
Forum
Replies
Last Post
pineapple13888
All Things Towing
2
Sep 15, 2021 06:40 AM
