Guessimating a price
Thread Starter
|
Junior User
Joined: Jan 2001
Posts: 60
Likes: 0
From: Hillsboro
Guessimating a price
Long time FTE guy. new to this forum... and might stay if the the PRICE IS RIGHT
Looking at a 53 F350 Dumpbox, for the most part not horrible shape but as projects go it will be one.
At the moment it has a 351w w/4 speed, they have a Y block and 4 speed (don't have the numbers) but they thought it was from this truck. I don't think so from what i hear from the forum and the "Ford Truck Chronicle" book i have. has rust under the gas cap near the bottom and the passenger floor ( no hole just rough)
Both RAMS are under the 9' foot bed but disconnected.. i think because the PTO mechanism that drives the motor is gone bc of the swap ?? is this how the dumpbox worked. Also no obvious oil resovoir.
It only has SRW.. i expected duallies but i think somebody took off the out wheels along the way.
What are projects like this going for - i know sight unseen it is tough but a good guessitmate, or experience on what most are paying for projects would help.
thanks, Dennis
Looking at a 53 F350 Dumpbox, for the most part not horrible shape but as projects go it will be one.
At the moment it has a 351w w/4 speed, they have a Y block and 4 speed (don't have the numbers) but they thought it was from this truck. I don't think so from what i hear from the forum and the "Ford Truck Chronicle" book i have. has rust under the gas cap near the bottom and the passenger floor ( no hole just rough)
Both RAMS are under the 9' foot bed but disconnected.. i think because the PTO mechanism that drives the motor is gone bc of the swap ?? is this how the dumpbox worked. Also no obvious oil resovoir.
It only has SRW.. i expected duallies but i think somebody took off the out wheels along the way.
What are projects like this going for - i know sight unseen it is tough but a good guessitmate, or experience on what most are paying for projects would help.
thanks, Dennis
Fleet Owner
Joined: Dec 2000
Posts: 25,421
Likes: 5,428
From: Central PA
Dennis, welcome to the 48-56 forum. Post pictures when you can . If it only has a rust hole on the driver's side rear can corner and a rough spot, no hole, on the passenger side floor board your ahead of where most of us were.
Yes. The 53 trucks would have had a flathead. The tranny would have driven the hoist with the PTO. I'm sure there are other ways to lift the bed, however. There are some F350s with SRW. Some had Express pickup beds. I've seen pictures of flatbeds with SRWs. So it could have been converted.
Has he given you a price?
Yes. The 53 trucks would have had a flathead. The tranny would have driven the hoist with the PTO. I'm sure there are other ways to lift the bed, however. There are some F350s with SRW. Some had Express pickup beds. I've seen pictures of flatbeds with SRWs. So it could have been converted.
Has he given you a price?
Thread Starter
|
Junior User
Joined: Jan 2001
Posts: 60
Likes: 0
From: Hillsboro
He is down to 3500 at this point.. and I know that is still decent. i was going to offer him 2500, and i am waiting for him to get the VIN, i couldn't find it and he is trying to find the title/papperwork which he does have. i learned on here where the vins are so i told him to lookin the glove compartment and the frame by the radiator. Killing just a bit of time.
trying to upload a quick video but wife needs my pc right now!!!
trying to upload a quick video but wife needs my pc right now!!!
Hotshot
Joined: Oct 2009
Posts: 16,199
Likes: 4,809
From: Burbank, WA
Thread
Thread Starter
Forum
Replies
Last Post
kyusik420
1957 - 1960 F100 & Larger F-Series Trucks
11
Mar 4, 2013 11:27 PM
redneckfarmers
1973 - 1979 F-100 & Larger F-Series Trucks
1
Jan 17, 2008 07:44 PM
74crwcb429hibPS4spd
1947 and Older Ford Trucks
3
Dec 23, 2003 01:42 PM
