Shock dilemma. Help!
Thread Starter
|
5th Wheeling
Joined: Feb 2021
Posts: 39
Likes: 13
From: Cumming
Shock dilemma. Help!
Truck was due for some shocks. Seems everyone is out of stock of bilsteins and fox but found the last few Fox 2.0’s on Riffraff.
Problem is what they sent me lol. Truck is 03 f250 leveled with just 1.5” block in the front.
I received:
so technically I am missing front shocks for 1.5-3” lift.
The 05 rear shocks are bigger and longer and look like they will work fine for the front since it only has a 1.5” level. Will these work for the front? Anyone done this before lol
The tube itself is longer as well as the piston. Just curious if this would be a stupid idea lol.
Problem is what they sent me lol. Truck is 03 f250 leveled with just 1.5” block in the front.
I received:
- 2- 99 and up, rear 0-1” lift shocks for the rear
- 2- 05 and up, rear 0-1” lift shocks.
so technically I am missing front shocks for 1.5-3” lift.
The 05 rear shocks are bigger and longer and look like they will work fine for the front since it only has a 1.5” level. Will these work for the front? Anyone done this before lol
The tube itself is longer as well as the piston. Just curious if this would be a stupid idea lol.
CNCFAB
Joined: Apr 2020
Posts: 4,874
Likes: 2,006
Truck was due for some shocks. Seems everyone is out of stock of bilsteins and fox but found the last few Fox 2.0’s on Riffraff.
Problem is what they sent me lol. Truck is 03 f250 leveled with just 1.5” block in the front.
I received:
so technically I am missing front shocks for 1.5-3” lift.
The 05 rear shocks are bigger and longer and look like they will work fine for the front since it only has a 1.5” level. Will these work for the front? Anyone done this before lol
The tube itself is longer as well as the piston. Just curious if this would be a stupid idea lol.
Problem is what they sent me lol. Truck is 03 f250 leveled with just 1.5” block in the front.
I received:
- 2- 99 and up, rear 0-1” lift shocks for the rear
- 2- 05 and up, rear 0-1” lift shocks.
so technically I am missing front shocks for 1.5-3” lift.
The 05 rear shocks are bigger and longer and look like they will work fine for the front since it only has a 1.5” level. Will these work for the front? Anyone done this before lol
The tube itself is longer as well as the piston. Just curious if this would be a stupid idea lol.
Call @Riffraff Performance and verify
Thread
Thread Starter
Forum
Replies
Last Post
