4X4 Low Range Question...
Thread Starter
|
New User
Joined: Oct 2003
Posts: 15
Likes: 0
From: Greenlawn NY
4X4 Low Range Question...
When I put my Bronco in 4H it goes in fine. It comes out of 4H in to 2wd fine as well no Grinding or clunking, Smooth. Now when I go to put it in 4L I stop and put it into N the try to shift in to 4L but it wont go. The transfer case shifter goes in to 4H then to N the it stops and will not Budge in to 4L. its like it stops at N and will not go any further.. I tried to do it while the truck was rolling VERY Slow and still nothing. it doesnt grind or anything like its not there 
... I also got underneth and checked all the linkage and all looks fine... any suggestions?
... I also got underneth and checked all the linkage and all looks fine... any suggestions?
New User
Joined: Sep 2003
Posts: 15
Likes: 0
From: idaho
i would have someone you trust try to shift it while you were watching from underneath. watch wich way it moves when going from 4h to 4l . remove the linkage and try to move it with a pair of pliers or vice grips. your linkage may just need to be adjusted.
