chip for v-10 custom
Thread Starter
|
Junior User
Joined: Sep 2003
Posts: 81
Likes: 0
chip for v-10 custom
Ok. I've got a 2001 v-10 in a mustang and was wondering what chip would give me the most power. And also if they can customize it. (take out stuff that i don't want)
I've got a cpu from a 2001 f-250 manual v-10
I have a 4r70w trans with a baumann box.
I've only got 2 o2's hooked up (can you make it so it doesn't need to read the other one?)
I am also about to put a 75 shot of nitrous on it, can you make a second program for the nitrous?
and about how much would this cost?
I've got a cpu from a 2001 f-250 manual v-10
I have a 4r70w trans with a baumann box.
I've only got 2 o2's hooked up (can you make it so it doesn't need to read the other one?)
I am also about to put a 75 shot of nitrous on it, can you make a second program for the nitrous?
and about how much would this cost?
Post Fiend
Joined: Jan 1997
Posts: 23,165
Likes: 18
From: Enjoying the real world.
A DiabloSport chip will really wake it up. Yes, we can customize it. for all of those modifcations. The 75HP nitrous shot isn't a problem either. See here http://www.motorhaven.com/customer/p...&cat=37&page=1 for pricing.
We would custom program it according to a spec sheet:
http://www.motorhaven.com/custom.htm
The nitrous is the easy part.
We would custom program it according to a spec sheet:
http://www.motorhaven.com/custom.htm
The nitrous is the easy part.
Post Fiend
Joined: Jan 1997
Posts: 23,165
Likes: 18
From: Enjoying the real world.
Sorry for the delay, been at the SEMA show.
You're looking at roughly 25-30 HP, closer to 30 for a 2001 cpu. About 45 ft/lbs torque. If you can fax us a custom sheet in advance I can burn the chip while you wait, however you need to give me several days if you plan to stop by because I am absolutely swamped because I've been in Las Vegas for a week. I'm going to be handling a lot of chips in the evenings this week while I catch up on email, return calls, etc. during the day.
You're looking at roughly 25-30 HP, closer to 30 for a 2001 cpu. About 45 ft/lbs torque. If you can fax us a custom sheet in advance I can burn the chip while you wait, however you need to give me several days if you plan to stop by because I am absolutely swamped because I've been in Las Vegas for a week. I'm going to be handling a lot of chips in the evenings this week while I catch up on email, return calls, etc. during the day.
