front hub assembly
Thread Starter
|
Freshman User
Joined: Sep 2003
Posts: 37
Likes: 0
front hub assembly
Does anyone know of an aftermarket company that makes a true Super Duty front hub assembly for a '01 250 SD, maybe one that can actually be serviced once in a while.
Thanks for any input.
Thanks for any input.
Tuned
Joined: Feb 2003
Posts: 335
Likes: 1
From: Houston, TX
Rich is talking about DynaTrac's SuperDuty combo kit, whose cool factor is matched only by its price. It's not clear to me, though, whether you are asking about "hubs" in the sense of the whole unit bearing assembly (in which case Rich's answer is right) or you are asking about the OEM "Auto-locking" hubs that lock your front hubs. If you are looking for alternatives there, look no farther than your choice of Mile Marker or Warn.
Post Fiend
Joined: Dec 2002
Posts: 6,245
Likes: 1
From: IL, USA
FYI, there are a few people working on heavy duty fixed spindle hubs for the SD.................to ditch the unit bearing setup.
Also, Dynatrac did mention when I talked to them a little while back that they are working on a kit to run on a truck with 0-4" of lift. The current SD combo is listed for 6-12" of lift.
Hope this helps.
Also, Dynatrac did mention when I talked to them a little while back that they are working on a kit to run on a truck with 0-4" of lift. The current SD combo is listed for 6-12" of lift.
Hope this helps.
