Spring is coming March BS thread
VT Chapter Ldr
Joined: Apr 2004
Posts: 96,160
Likes: 294
From: Orange, Vermont
Fleet Owner
Joined: Mar 2007
Posts: 28,312
Likes: 6
From: BLT, MN
Good morning Cory.
Good morning Troy. Yay Friday!
Thread Starter
|
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,869
Likes: 9
From: Suppertown, MN
Good morning Jay! Well that's sounds interesting.....maybe. Nothing that exciting here. Working around here and then a wedding reception to go to tonight.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 6 Best Deals Available on New Fords & Lincolns Right Now
Brett Foote
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Verdad Gallardo
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Thread Starter
|
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,869
Likes: 9
From: Suppertown, MN
Howdy Jay! Glad it went good looking at homes. Yep the reception went well. Enjoy the bike ride. Kinda cold here so far today. Only in the 40's and the wind is blowing like 30 or so.
VT Chapter Ldr
Joined: Apr 2004
Posts: 96,160
Likes: 294
From: Orange, Vermont
good morning MN. Sounds like you guys might get a few inches of snow this week.
I got the atv's going this weekend. I pulled the carb off the 06 outlander. last fall it was not idling and would have to get the rpms up to get any power to move. It never started very good after setting for a few days or longer. the carb was clean inside. I think it may have been falling off the manifold carb flange but not sure. I got it back together and seems to start quicker and runs good. Also has a hard random snapping coming from the front. Almost seems like it happens when the front end unloads a little weight. I pulled the cv shaft last year and it seemed fine. Not sure if something in the front differential is slipping or skipping.
I got the atv's going this weekend. I pulled the carb off the 06 outlander. last fall it was not idling and would have to get the rpms up to get any power to move. It never started very good after setting for a few days or longer. the carb was clean inside. I think it may have been falling off the manifold carb flange but not sure. I got it back together and seems to start quicker and runs good. Also has a hard random snapping coming from the front. Almost seems like it happens when the front end unloads a little weight. I pulled the cv shaft last year and it seemed fine. Not sure if something in the front differential is slipping or skipping.
Thread Starter
|
FTE Chapter Leader
Joined: Mar 2005
Posts: 23,869
Likes: 9
From: Suppertown, MN
good morning MN. Sounds like you guys might get a few inches of snow this week.
I got the atv's going this weekend. I pulled the carb off the 06 outlander. last fall it was not idling and would have to get the rpms up to get any power to move. It never started very good after setting for a few days or longer. the carb was clean inside. I think it may have been falling off the manifold carb flange but not sure. I got it back together and seems to start quicker and runs good. Also has a hard random snapping coming from the front. Almost seems like it happens when the front end unloads a little weight. I pulled the cv shaft last year and it seemed fine. Not sure if something in the front differential is slipping or skipping.
I got the atv's going this weekend. I pulled the carb off the 06 outlander. last fall it was not idling and would have to get the rpms up to get any power to move. It never started very good after setting for a few days or longer. the carb was clean inside. I think it may have been falling off the manifold carb flange but not sure. I got it back together and seems to start quicker and runs good. Also has a hard random snapping coming from the front. Almost seems like it happens when the front end unloads a little weight. I pulled the cv shaft last year and it seemed fine. Not sure if something in the front differential is slipping or skipping.
VT Chapter Ldr
Joined: Apr 2004
Posts: 96,160
Likes: 294
From: Orange, Vermont
So he is getting it ready for next season? seems like he would have the shocks done in the fall so if one had a slight leak he could get most of the season before needing to deal with it. But is less stressful to have things ready to go well in advance. Sucks having to do it during the season, trying to get parts quickly or coordinating with someone to get some work done in time to ride.