Output Shaft Play
Thread Starter
|
New User
Joined: Aug 2018
Posts: 16
Likes: 0
Output Shaft Play
2013 F-250 6.2L 4wd CCSB
I have a vibration at around 50 mph so I changed out my u-joints today. I have a 1 piece driveshaft so no carrier bearing. I noticed the output shaft has significant up and down play to it that definitely doesn't feel correct. I couldn't find anything on what to do. Can I remove the tailshaft coming from the transfer case and replace a bearing? Do I just need a new yoke? Any help would be appreciated. Thanks fellas.
I have a vibration at around 50 mph so I changed out my u-joints today. I have a 1 piece driveshaft so no carrier bearing. I noticed the output shaft has significant up and down play to it that definitely doesn't feel correct. I couldn't find anything on what to do. Can I remove the tailshaft coming from the transfer case and replace a bearing? Do I just need a new yoke? Any help would be appreciated. Thanks fellas.
Thread
Thread Starter
Forum
Replies
Last Post
gatesj
1987 - 1996 F150 & Larger F-Series Trucks
8
Mar 3, 2006 03:21 PM
