Hello from New England
Thread Starter
|
Trailering
Joined: Dec 2020
Posts: 24
Likes: 6
Hello from New England
Hey everyone,
Thought I'd take a second to say hi. New to the group obviously but not new to fords or forums. I've owned almost exclusively Fords and Jeeps since I got my license 23 years ago. I don't have a Ford ATM but I'm planning a project hopefully to start in the spring so I'm here for research and inspiration. Here's a quick run down of the Fords I've owned (as I can recall) starting with my very first vehicle....
1985 Ford Ranger XLT long bed, 3" body lift that was hideous and 31" all terrains
1987 Ford Bronco II
1988 F150 (lariat maybe?) had the optional 4spd with granny low (loved this truck)
1991 F150 short bed
1995 F150 ext. cab
1994 Ford Explorer XLT
1998 Ford Explorer Sport
1999 Ford Explorer Sport (leather, power everything, sunroof, nice Exploder)
1998 Lincoln Navigator (it counts) but this thing was a POS and I unloaded it fast
All of the 4 wheel squeal because, well I live in NH so it's pretty much required.
See you around guys!
Thought I'd take a second to say hi. New to the group obviously but not new to fords or forums. I've owned almost exclusively Fords and Jeeps since I got my license 23 years ago. I don't have a Ford ATM but I'm planning a project hopefully to start in the spring so I'm here for research and inspiration. Here's a quick run down of the Fords I've owned (as I can recall) starting with my very first vehicle....
1985 Ford Ranger XLT long bed, 3" body lift that was hideous and 31" all terrains
1987 Ford Bronco II
1988 F150 (lariat maybe?) had the optional 4spd with granny low (loved this truck)
1991 F150 short bed
1995 F150 ext. cab
1994 Ford Explorer XLT
1998 Ford Explorer Sport
1999 Ford Explorer Sport (leather, power everything, sunroof, nice Exploder)
1998 Lincoln Navigator (it counts) but this thing was a POS and I unloaded it fast
All of the 4 wheel squeal because, well I live in NH so it's pretty much required.
See you around guys!
Former Vendor
Joined: May 2013
Posts: 1,691
Likes: 260
From: Cranbury
Hello and welcome to the community! Great to have you here. Plenty of knowledgeable and friendly folks here as well as informative and insightful discussion threads. Feel free to reach out if any questions appear!
Cargo Master
Joined: Sep 2005
Posts: 2,911
Likes: 634
From: NEPA
Thread Starter
|
Trailering
Joined: Dec 2020
Posts: 24
Likes: 6
Thanks for the welcome wagon guys - Hoping to learn a lot and also contribute the things I've learned over the years myself. I've got my mind set on a Dentside for a build project but still doing research and cost estimation, can't afford it right away anyhow.
Thread
Thread Starter
Forum
Replies
Last Post
