Angle kit
Thread Starter
|
New User
Joined: Nov 2020
Posts: 2
Likes: 0
Angle kit
I read some info about 'angle kits' which are used to tighten a vehicle's turn radius by modifying the front suspension and steering in relatively minor ways (or so it sounded). This is apparently done so the modified car can drift more or less sideways. Okay... don't need that, but I do have a long-bed 4DR F350 with the turning radius of a battleship and there are many times this constitutes an aggravation when trying to line it up with something, like the driveway. The kits are for specific vehicles and I doubt mine would be in that category. Any ideas, or actual experiences, pertaining to this? Thanks.
Logistics Pro
Joined: Jan 2010
Posts: 4,109
Likes: 1,638
If you want a SuperDuty that turns tight, look at an '08+ F450. 4WD, CCLB, Dually, and will still turn tighter than anything that size should be capable of. The front wheels will turn damn near sideways.
Otherwise...yeah, you aren't going to make that turn any tighter than it does right now unless you break something.
Otherwise...yeah, you aren't going to make that turn any tighter than it does right now unless you break something.
Thread
Thread Starter
Forum
Replies
Last Post
76 MA Bronco
1966 - 1977 Early Broncos
8
Apr 8, 2005 04:12 AM
randallc
Brakes, Steering, Suspension, Tires, & Wheels
2
Jan 11, 2003 04:35 PM
