New member
Thread Starter
|
New User
Joined: Oct 2020
Posts: 4
Likes: 0
New member
Hi all. Just joined up. We are in the Uk and have had a Ford Lightning 03 for just over a year now but have dived into Classic ownership with a project truck.
The project is an F-100 56 and I found this site through trying to Google others that had the Crown Vic 4.6 engine and transmission as we are struggling with the running.
The plan is to get the engine running right so we know this part is good then sort out some of the poorer parts of the previous conversion. I’m guessing this forums search button is going to be my new best friend but please forgive me if I ask daft questions. I’m already struggling with just getting a wiring diagram for the engine so I can trace the o2 sensor and Evap wiring. (Since having it I have so far got a diagnostic port and EML light wired from scratch so I can get the faults so just on to the next bit
The project is an F-100 56 and I found this site through trying to Google others that had the Crown Vic 4.6 engine and transmission as we are struggling with the running.
The plan is to get the engine running right so we know this part is good then sort out some of the poorer parts of the previous conversion. I’m guessing this forums search button is going to be my new best friend but please forgive me if I ask daft questions. I’m already struggling with just getting a wiring diagram for the engine so I can trace the o2 sensor and Evap wiring. (Since having it I have so far got a diagnostic port and EML light wired from scratch so I can get the faults so just on to the next bit
Hotshot
Joined: Feb 2015
Posts: 17,559
Likes: 1,081
From: Central Delaware
Welcome to FTE. The FORUMS button, at the top left of your page may even be better than the search button.
Don't for get to check out the International chapter too. You may just find some help, a lot closer to home.
Don't for get to check out the International chapter too. You may just find some help, a lot closer to home.
Thread
Thread Starter
Forum
Replies
Last Post
Dad&Son
New Member Introductions
1
Nov 3, 2007 08:27 PM
