Blend door actuator

Reply Subscribe

Thread Tools

Search this Thread

Jul 19, 2020 | 04:19 PM

Jbastian

Thread Starter

New User

Joined: Jul 2020

Posts: 2

Likes: 0

Blend door actuator

Hey everyone I’m sure there is a thread on this subject i just can’t seem to find one. Ok so my question is I’m replacing the heater/AC blend door actuator on my 2019 f250 6.2 liter and not sure how to calibrate the new actuator would any one know the procedures on this?

thanks in advance for your help

Jul 19, 2020 | 05:30 PM

RONMCHUGH

Romcjr

Joined: Jul 2008

Posts: 788

Likes: 40

From: Waller,TX.

Is your truck out of warranty ? Looks like something I would let the dealer fix .

Jul 19, 2020 | 05:34 PM

Jbastian

Thread Starter

New User

Joined: Jul 2020

Posts: 2

Likes: 0

Out of warranty. And a pretty easy fix. Just trying to find out the calibration for actuator door

Jul 19, 2020 | 05:39 PM

RONMCHUGH

Romcjr

Joined: Jul 2008

Posts: 788

Likes: 40

From: Waller,TX.

Hopefully one of the Ford techs will chime in and be able to help . Good luck , hope you get it fixed !!

Jul 20, 2020 | 10:30 AM

rwilimo

Fleet Mechanic

Joined: Aug 2005

Posts: 1,339

Likes: 5

From: NJ

No Ford's I have ever seen need to be calibrated

Jul 20, 2020 | 03:17 PM

Louisville Joe

Fleet Mechanic

Joined: Jul 2004

Posts: 1,511

Likes: 198

I am not sure it needs calibration either. What a job though, reminds me of an evaporator core I did on a '13 F-250. You would think Ford would make the actuators accessible without removing the HVAC box. Like other manufacturers.......