My 12/19 production 20 250 did not come with the sleeve. The truck was on their lot for 4 months, so if it was in the receiver, some lowlife may have snagged it.

 

IF YOU HAVE AN F250, OR ANY SUPER DUTY WITH THE 2.5" RECIEVER, FORD DOES NOT INCLUDE A REDUCER SLEEVE!! THAT IS TRUE SINCE ABOUT 2019 MY, AND IS STILL TRUE FOR THE 2020'S.......YES, YOUR 2020 TOO!

 

I had nothing, bought a 3-2. Dealer told me they don't give them out anymore. For all I know the dealer re sells them lol

 

MY 2020 F350 CAME WITH A SLEEVE!!



LOUD NOISES !

 

LOL, IM GOING TO GO OUT ON A LIMB HERE....3" RECIEVER!?

 

I have a 3" receiver and did not get a sleeve

 

I guess I'm special.

I have a 3" and the dealer gave me a 2-1/2" and a 2"

 

Do you mean no reducer sleeve for an F250 in the XL-STX line since those base trucks aren't premium trucks?

And F250 XLT-LIMITED get reducer sleeves because they are premium trucks?

Mine is a 19 F250 STX and now I'm wondering if I should have bumped up to XLT to get a free reducer sleeve. I haven't found anything on their website build about this.

This is a genuine question. I'm not joking. If anyone makes fun of me I will report you

 

Im not sure if Id opt for a $4-$5k upgrade to an XLT for a $50 adapter.

 

Yes, but there is this stupid piece of square metal in there that makes it smaller, gonna throw that in the garbage.

 

WHY IS EVERYONE YELLING?

18 was the best year. You got all the reduced sleeves you would ever need, and then some.

Id probably pay 4-5k to upgrade to get a reducer sleeve and few extra options.

FORCALs post above was correct on who gets them and who doesn’t.

 

Great questions, and no question is a dumb question kiddo. Ill ask my dealer next time.


Fixed, wife or is it partner, whatever is pc, she showed me the caps button.

I would take it off your hands if you think theres a chance it will fit a 2019 F250 w/2.5" reciever. It is a Lariat, so it might, right?

 

There was no sleeve with my 2020 as was expected. But, I needed a extender/reducer due to hauling a truck camper. They come 3’-0”, I only needed 2’-0”. After cutting a 1’-0” of the end, I now have a sleeve and an extender.

 

I bought these shanks a while back, the way they are grooved to fit each other are nice.

https://www.curtmfg.com/part/45408

 

Those are nicer than the 2.5-2" Ford one I had to get. The Ford reducer doesn't have a stop so it is a pain to line up.