How do you wire a gas cruise actuator into a 6.0 diesel F-350
#1
How do you wire a gas cruise actuator into a 6.0 diesel F-350
Years ago I saved some links to discussions that outlined how to connect a gas cruise control actuator into a 6.0 Powerstroke truck to get cruise control working for a Cummins swap. Some links are dead and those that are live have had pictures lost by photbucket. I have a 2003.
Thanks!
Thanks!
#2
IF you are talking about a Vacuum Cruise control there is really no difference in diesel or Gasser... you just need to supply a Vacuum Source with a diesel where as the Gasser makes plenty Vacuum from the manifold.
the wiring should be straight forward as to the Cruise system you have.
I can answer more specific questions if you give more details about what Cruise Control you are trying to install.
the wiring should be straight forward as to the Cruise system you have.
I can answer more specific questions if you give more details about what Cruise Control you are trying to install.
Thread
Thread Starter
Forum
Replies
Last Post
Fritz Alderman
1999 to 2016 Super Duty
0
05-04-2018 09:04 AM
mort2000
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
1
10-11-2010 08:38 PM
rockcrawlerdude
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
2
07-09-2007 05:30 PM