Pulley Alignment problem
Thread Starter
|
New User
Joined: Oct 2003
Posts: 1
Likes: 0
Pulley Alignment problem
Had a new engine installed and I've gone through 2 serpentine belts in the last 3 weeks. The pulleys are not aligned. Is there a way to adjust the pulleys to make them line up so I don't have to get belts every 2 weeks. Thanks and what would make the pulleys all of a sudden become unaligned. I got the same exact size engine, etc for the replacement.
1989 F-150 300 cu, 4.9 liter
1989 F-150 300 cu, 4.9 liter
Senior User
Joined: Aug 2003
Posts: 394
Likes: 0
when u installed it, sometimes people use the wrong bolt on the waterpump and it will kick it out 1/2 in for the bolt head, i am not too familiar with your particular setup but double check to make sure that the brackets are flush with the motor
also is it a new waterpump?
also is it a new waterpump?
