Decoding 9" tags
Thread Starter
|
Tuned
Joined: Oct 2014
Posts: 406
Likes: 2
From: Tucson Arizona
Decoding 9" tags
Is there an app that decodes the diff tags for 9"?
I'm hoping to get the axle spline count on my wife's 1971 F100.
I'm swapping in my old 9" pumpkin from my 1969 Cyclone GT 428CJ. 4.30:1 Detroit Locker, Daytona pinion, N case. It's been sitting around for over 30 years and I think that it is high time I rebuilt it and used it.
It is setup for the 31 spline axles. I'd like to know if I need new axles or a different Detroit before I get involved in tearing things apart.
I'm hoping to get the axle spline count on my wife's 1971 F100.
I'm swapping in my old 9" pumpkin from my 1969 Cyclone GT 428CJ. 4.30:1 Detroit Locker, Daytona pinion, N case. It's been sitting around for over 30 years and I think that it is high time I rebuilt it and used it.
It is setup for the 31 spline axles. I'd like to know if I need new axles or a different Detroit before I get involved in tearing things apart.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
Is there an app that decodes the diff tags for 9"? I'm hoping to get the axle spline count on my wife's 1971 F100.
I'm swapping in my old 9" pumpkin from my 1969 Cyclone GT 428CJ. 4.30:1 Daytona pinion, N case.
It is setup for the 31 spline axles. I'd like to know if I need new axles or a different Detroit before I get involved in tearing things apart.
I'm swapping in my old 9" pumpkin from my 1969 Cyclone GT 428CJ. 4.30:1 Daytona pinion, N case.
It is setup for the 31 spline axles. I'd like to know if I need new axles or a different Detroit before I get involved in tearing things apart.
Post the tags.
Thread Starter
|
Tuned
Joined: Oct 2014
Posts: 406
Likes: 2
From: Tucson Arizona
Cool. thanks Bill.
WDH-AD 1ED
3.00 9 314A
I think that it is a 9' with 28 spline axles.
I'll need to find some of the 31 spline axles.
There is a couple of locals who might be axle heavy...
WDH-AD 1ED
3.00 9 314A
I think that it is a 9' with 28 spline axles.
I'll need to find some of the 31 spline axles.
There is a couple of locals who might be axle heavy...
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
// 1ED
There is no prefix of WDH .. There is WDM-AD, but this is a 9" w/a 8 3/4" ring gear, 3.50-1 ratio with 28 spline axle shafts.
Closest I can find is WDM-AG = 9" 3.00 with 28 spline axle shafts.
1ED = Assembled the 4th week (D) of May (E), 1971 (1).
Thread
Thread Starter
Forum
Replies
Last Post
planesrhino
1948 - 1956 F1, F100 & Larger F-Series Trucks
6
Mar 20, 2007 07:57 PM
hellbilly1932
1948 - 1956 F1, F100 & Larger F-Series Trucks
12
Feb 20, 2007 10:06 AM
1982fordf100
Clutch, Transmission, Differential, Axle & Transfer Case
2
Apr 25, 2005 11:58 AM
