When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
In the pictures is my 81 f150 was a automatic i put a 4 speed from a 84 bronco in it. Motor is 302 in both. In the pictures is the new transmission in the truck along with a slave cylinder bracket i made. I tried using a slave cylinder with 'wings' on it to bolt to my bracket. I have bled the system out thw best i could there is pressure when you put the pedal down but it dosent come uo by itself. I put a spring with some good strength to it from the fork to my bracket. But it dosent seem to pull the fork back to the bracket good enough and im all together having a horrific time with all of this. Is there anything im missing here? Or anything i can do different? The cylinder is about head on with the dent in the fork where its supposed to be but the fork acts like it dosent wanna go back all the way when the pin from the cylinder comes out. Any help is appreciated
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Slideshow: The VelociRaptor Expedition gains a lift, upgraded suspension, Brembo brakes, and trail-ready equipment while retaining the stock 440-horsepower EcoBoost V6.
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.
