Quadravan Conversion Part Numbers
Thread Starter
|
Cargo Master
Joined: Oct 2012
Posts: 3,072
Likes: 48
From: California
Quadravan Conversion Part Numbers
I recently acquired a quadravan kit (axle + suspension + steering parts). The only thing it didn't have was the transfer case. I bought a NP208F and I'm going to try to make that work.
My plan is to install this on my 1988 E250 Clubwagon. I was wondering if any of you 80's quadravan owners had some of the part numbers for the tie rods, ball joints, bearings, coil springs, and shocks for that system? The guy I bought it from said it was from a mid-80's econoline. The current kit is complete, but a bit worn out, so while I have it laying on my garage floor, I might as well do all the maintenance now.
My plan is to install this on my 1988 E250 Clubwagon. I was wondering if any of you 80's quadravan owners had some of the part numbers for the tie rods, ball joints, bearings, coil springs, and shocks for that system? The guy I bought it from said it was from a mid-80's econoline. The current kit is complete, but a bit worn out, so while I have it laying on my garage floor, I might as well do all the maintenance now.
Thread
Thread Starter
Forum
Replies
Last Post
Waylon77
1997 - 2006 Expedition & Navigator
184
Jan 28, 2025 06:09 PM
genscripter
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
48
Jan 14, 2020 01:02 AM
