When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Many thanks! Already scheduled my first service visit...figured I've have some kinks to work out with all the electronics.
1) backup camera overbed is fuzzy and can't be used. Worked fine during test drive. Any ideas?
Maybe the CCD wasn't fixed all the way in the housing or something, and now has vibrated loose (therefore away from the lens). If the lens is clean then I'd just have them look at it while it's there.
Hi and welcome to the club! Congrats on your truck, looks great. You're joining a great community. Folks here are very willing to help and share information. Enjoy your new ride and your time here!
Needed to add fog lights but didn't want to buy a new bumper...realized what I really needed was off road lights for camping...wired the aux switch #1 and pleased with the result. Hardest parts were getting to the aux wires and putting the wire insulator on after connected. I knew to insulate first but was running out of daylight and wanted to make sure everything worked... Low beam High beam 'Let there be light' Happy with 2" cube's. Mounted on inside bumper bolts...needs some alignment but getting closer. Need rear lights but will wait for the camper..
