oil leak
Lead Driver
Joined: Jan 2003
Posts: 9,893
Likes: 12
From: Ohio
If it is the adapter...I would suggest removing it and either buying or making a new gasket for it. Pretty simple piece to fix. If the adapter is cracked, then a trip to the yard will get you a new one.
I would also look at the oil pressure sender, they are know to sprout leaks after a few good years of running.
Spray some carb cleaner around everything and start it up. Look for the leak.
Larry
I would also look at the oil pressure sender, they are know to sprout leaks after a few good years of running.
Spray some carb cleaner around everything and start it up. Look for the leak.
Larry
Thread Starter
|
Elder User
Joined: Apr 2003
Posts: 789
Likes: 0
From: Cheney, Wa
whats the easiet way to get to the top bolt on the adapter, i've got hedman long tubes and big hands so i can't exactly get a wrench on it...any suggestions? it looks like there is's a little leak out of the oil pan as well but the headers are blocking the bolt again. dang it.... well the headers were kinda warped anyway and they leaked too, sounds like i'm buying the big tube of rtv
