Forged piston selection
Thread Starter
|
Laughing Gas
Joined: Feb 2002
Posts: 1,067
Likes: 13
From: Kincardine, ON
Forged piston selection
I could use some advice on piston selection. I'm relpacing the rods and pistons this fall (40 thou over), the eagle SIR rods are here already and I'm looking for advice on a manufacturer for the slugs. This truck is summer street driven (hard) and the occasional track launch. I'll have a final CR of 10.5:1 and maybe a 150 - 200hp shot of juice (depending on upcoming legality changes). I know the costs range from cheap to through the roof, I don't want to overbuy but I'm willing to pay for quality that will be trouble free. Any help would be appreciated. Thanks.
John.
John.
