Looking for ScanGauge PID codes - 2017 E/F450 TorqShift trans
#1
Join Date: Jun 2014
Location: DFW, TX-GoldCanyon, AZ
Posts: 7,209
Likes: 0
Received 2 Likes
on
2 Posts
Looking for ScanGauge PID codes - 2017 E/F450 TorqShift trans
Hi guys,
So far no joy in the other forum for SuperDuty trucks.
I have a 2017 E450 based motorhome that I would like to use my ScanGauge 2 on.
https://www.ford-trucks.com/forums/1...ii-needed.html
In particuilar, I am looking for the codes for GER (current gear) and will also be looking to monitor Transmission Temp.
Any help is certainly appreciated!
So far no joy in the other forum for SuperDuty trucks.
I have a 2017 E450 based motorhome that I would like to use my ScanGauge 2 on.
https://www.ford-trucks.com/forums/1...ii-needed.html
In particuilar, I am looking for the codes for GER (current gear) and will also be looking to monitor Transmission Temp.
Any help is certainly appreciated!
#3
Join Date: Jun 2014
Location: DFW, TX-GoldCanyon, AZ
Posts: 7,209
Likes: 0
Received 2 Likes
on
2 Posts
Hi Art,
Thanks for your note -
I have called Linear Logic (makers of ScanGauge) as I pointed out in the thread I referenced. One of the engineers took a stab at the PID codes but they didn’t work. I emailed them back and am waiting to hear back.
Meanwhile, I thought perhaps someone here had already slayed that dragon and had the codes I need.
Thanks for your note -
I have called Linear Logic (makers of ScanGauge) as I pointed out in the thread I referenced. One of the engineers took a stab at the PID codes but they didn’t work. I emailed them back and am waiting to hear back.
Meanwhile, I thought perhaps someone here had already slayed that dragon and had the codes I need.
Thread
Thread Starter
Forum
Replies
Last Post