here starts something.
Thread Starter
|
Senior User
Joined: Apr 2003
Posts: 159
Likes: 1
From: nowhere town nj
here starts something.
i have an 86 f150 4x4 with a 302/aod combination. well that old aod (190,850) is gettign pretty tired. i have a c6 that i want to rebuild and put in place of the hunk of **** that calls itself a transmission. my question to all of the experienced and knowledgable!
how dificult is it? what do i need to change as far as cross member, shift linkage, kickdown, and anything else that you can think of.
thanks for all teh help io knwo your gonna give me.
how dificult is it? what do i need to change as far as cross member, shift linkage, kickdown, and anything else that you can think of.
thanks for all teh help io knwo your gonna give me.
all alone in the world
Joined: Feb 2002
Posts: 2,038
Likes: 1
From: oklahoma
you will have to get a c6 for a 4x4, tailshaft is a different length. did this swap a few years ago. had to get the t case adaptor and the t case shift rod. other than that it was a straightforward swap. drive shafts are the same, crossmember fit in the origional position also. make sure the tranny or tailshaft you get is for the warner t case, not the new process.
