Cam it up
Thread Starter
|
Junior User
Joined: Mar 2002
Posts: 95
Likes: 0
From: Home Town
Cam it up
I am considering installing a cam in my 93 4.9. 70,000 kilometers
I use the truck for hauling and towing fairly heavy loads.
Have done some stuff but would like some more CAM power.
SUGGESTIONS AND OPINIONS WOULD BE GREATLY APPRECIATED.
BRAIN BOX? injectors? thanx for helping
I use the truck for hauling and towing fairly heavy loads.
Have done some stuff but would like some more CAM power.
SUGGESTIONS AND OPINIONS WOULD BE GREATLY APPRECIATED.
BRAIN BOX? injectors? thanx for helping
Elder User
Joined: Apr 2003
Posts: 627
Likes: 1
I installed a Comp cams 260H in my 300 and haven't been able to get the valve train noise under control. I've tried 2 sets of lifters and new springs and adjustable rockers and I'm confident the noise is coming from the valve slamming back on their seats and not the lifters but today it comes out and a stock cam goes in. It was advertised as a fairly low rpm cam but it doesn't really get with it until about 3000 rpm then it flies - but the noise!!
