When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey wauto, I’m located in central NY. Small town called Cherry Valley. I’m definitely willing to travel to find a rust free hood. Road salt has wrecked most local ones I’ve found
Him Nick, you can browse craigslist, or check in with the Chapters in MD, WV , VA, NC, PA etc
Here's a PA one, hard to tell the hood condition though https://elmira.craigslist.org/pts/d/...781331531.html
I usually go down to VA during the Winter and never know what I'll find. Did find a fairly decent 71 shortbed no eng or trans for $1000. The bed is real good.
Sometimes you find something like this and have to contact the guy to see if he has any other parts. https://elmira.craigslist.org/pts/d/...757228808.html https://martinsburg.craigslist.org/p...788463510.html
Been by C Valley many times. Had an Aunt that lived in Sharon Springs.
There is a yard around Morrisville that might have something and (CRS) maybe another around Munnsville.
I went to LI a few years ago and got a F600 cab and front clip. I'll have to check in the morning but I think the hood has pin holes in the front of it.
Him Nick, you can browse craigslist, or check in with the Chapters in MD, WV , VA, NC, PA etc
Here's a PA one, hard to tell the hood condition though https://elmira.craigslist.org/pts/d/...781331531.html
I usually go down to VA during the Winter and never know what I'll find. Did find a fairly decent 71 shortbed no eng or trans for $1000. The bed is real good.
Sometimes you find something like this and have to contact the guy to see if he has any other parts. https://elmira.craigslist.org/pts/d/...757228808.html https://martinsburg.craigslist.org/p...788463510.html
Been by C Valley many times. Had an Aunt that lived in Sharon Springs.
There is a yard around Morrisville that might have something and (CRS) maybe another around Munnsville.
I went to LI a few years ago and got a F600 cab and front clip. I'll have to check in the morning but I think the hood has pin holes in the front of it.
Thanks for the links. I found a salvage yard about an hour away that has two hoods in storage and several trucks. I’m going to go look at them Saturday. I also found a company in Florida that makes goods for the 67-72 out of fiberglass. I’m not sure I really want to go that route, I’m worried about fit up issues.
This Hennessey Takes the Expedition Tremor's Off-Roading Capability to the Next Level
Slideshow: The VelociRaptor Expedition gains a lift, upgraded suspension, Brembo brakes, and trail-ready equipment while retaining the stock 440-horsepower EcoBoost V6.