Abs sensor ohms readings.
Thread Starter
|
New User
Joined: Oct 2018
Posts: 1
Likes: 0
Abs sensor ohms readings.
Hi. I have a 2006 f250 super duty. I changed out the passenger side front wheel bearing hub assembly. Now I have a abs light on my dash. I cleared the alarm several times but keeps coming back. I ohmed out the abs sensor on the new bearing and ohms out at 450.2. I ohm out the one I took off and reads 10.2. I then ohmed out driver side and reads 10.2. I ordered new abs sensors and they read out at 450.2.
. So my question. Is why such difference in the readings. And could I be getting this alarm because passenger side is at 450.2 and driver side is 10.2?
. So my question. Is why such difference in the readings. And could I be getting this alarm because passenger side is at 450.2 and driver side is 10.2?
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Vendor Specials, Discounts, Product Announcements & Group Buys
1
Jun 16, 2016 12:24 PM
1Aauto
Vendor Specials, Discounts, Product Announcements & Group Buys
2
Aug 18, 2014 03:04 PM
1Aauto
Vendor Specials, Discounts, Product Announcements & Group Buys
0
Feb 18, 2011 11:00 AM
1Aauto
Vendor Specials, Discounts, Product Announcements & Group Buys
0
Feb 10, 2011 10:15 AM
